Petroleum Equipment Forum - Encore 500S scanners

Petroleum Equipment Forum

Username:	Password:
Save Password
Forgot your Password?

All Forums

General Business, Service & Construction

Service & Technical

Encore 500S scanners

New Topic

Reply to Topic

Printer Friendly

Author

Topic

Petrotech

USA
100 Posts

Posted - 08/20/2012 : 21:38:48

Ordered the only scanner available for the 500S and it came single line scan. I need orbital for a loyalty program application. I've made numerous calls to other Gilbarco houses and have not been able to find an answer. Part #M01304A001

RossD

USA
398 Posts

Posted - 08/20/2012 : 22:11:02

have you seen this orbital scanner on a Gilbarco before, I have only seen single line on Wayne dispensers?

Petrotech

USA
100 Posts

Posted - 08/20/2012 : 22:23:57

I've got 7 other dispensers that have the orbital pattern. Same engine including same p/n as the new one that came single line from Gilbarco. Called the loyalty interface techs, no help. These scanners were retrofit.

AmPetTech

190 Posts

Posted - 08/21/2012 : 09:11:35

You can set the scan pattern in programming under barcode scanner setup if the crind s/w is new enough. Options are cyclonic and raster. M01304A001 is an Advantage scanner. The P/N for the E500S scanner is M06692A001

Extremism in the defense of liberty is no vice. And moderation in the pursuit of justice is no virtue.
Barry Goldwater
"An armed society is a polite society. Manners are good when one may have to back up his acts with his life"
Robert A. Heinlein

Petrotech

USA
100 Posts

Posted - 08/22/2012 : 22:54:16

Thank you.. I'll check it out.

Topic

New Topic

Reply to Topic

Printer Friendly

Jump To:

Petroleum Equipment Forum

Snitz Forums 2000