Petroleum Equipment Forum
Petroleum Equipment Forum
Home | Profile | Register | Active Topics | Active Polls | Users | Search | Help
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 General Business, Service & Construction
 Service & Technical
 petro vend site controller		 Bookmark and Share
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tjek

56 Posts
Posted - 08/03/2012 :  19:16:46  Show Profile  Reply with Quote
got a site with a petro-vend,sysmtem2 software.with 2 card reader heads i had to reprogram the site controller got it program it,ran a card it came up card invalid,it got cfn network.any ideas
tim

workinghard

USA
130 Posts
Posted - 08/04/2012 :  16:25:54  Show Profile  Reply with Quote
Did you set up your fleet and iso's? iso is basically your card bin ranges to define what card number is which card type and how to process it.

Most likely you are using an Abierto box to talk to cfn. If so call Abierto network support and use extension 102. I can't remember her name, but she is real good at getting it working with petrovend.
Sure, I will do a side job for you.... the cost is 100,000 for the first trip, since I will lose my job, I will need the extra cash.
Go to Top of Page

Johnathanmpt

USA
143 Posts
Posted - 08/04/2012 :  18:15:12  Show Profile  Reply with Quote
Like Workinghard said, once you verify your iso's and fleet info. Call the network and ask if they can see the card hit their network. You may want to use the "Test" command and Monitor the modem port. It will display any errors when dialing out and will show card info etc during the transaction.
Go to Top of Page
  Previous Topic Topic Next Topic  
Bookmark and Share
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Petroleum Equipment Forum © 2013 Petroleum Equipment Institute Go To Top Of Page
Register Now! XML Feed Follow us on Facebook RSS Feed Snitz Forums 2000