Petroleum Equipment Forum
Petroleum Equipment Forum
Home | Profile | Register | Active Topics | Active Polls | Users | Search | Help
Username:
 Password:
Save Password
Forgot your Password?

 All Forums
 General Business, Service & Construction
 Service & Technical
 tokheim premier B		 Bookmark and Share
 New Topic  Reply to Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

tjek

56 Posts
Posted - 07/14/2012 :  09:52:53  Show Profile  Reply with Quote
went to a site, their dispensers are tokheim premier B. On the A side working perfect, on the B side, will not work, on the card reader display its coming up as the diagnosic as it is in diagnosic programming but it is not in programming, could it be the dpt-cpu board or could it be just the cpu board, any ideas

tim

vitto

USA
287 Posts
Posted - 07/14/2012 :  10:13:36  Show Profile  Reply with Quote
check keypads could have a stuck key and when powered up it is going into diagnostics mode i believe that holding a keypad key down and powering up card readers will put it into diag mode just a thought!!
Go to Top of Page

tjek

56 Posts
Posted - 07/14/2012 :  10:26:29  Show Profile  Reply with Quote
i change the keypad&overlay also the interface board to
tim
Go to Top of Page

ScottW

USA
892 Posts
Posted - 07/14/2012 :  17:09:53  Show Profile  Reply with Quote
yes - there is a jumper on the older dpt boards that put it into diag. Swap the card cage with another dpt - will follow then r2 the dpt board.
Go to Top of Page
  Previous Topic Topic Next Topic  
Bookmark and Share
 New Topic  Reply to Topic
 Printer Friendly
Jump To:
Petroleum Equipment Forum © 2013 Petroleum Equipment Institute Go To Top Of Page
Register Now! XML Feed Follow us on Facebook RSS Feed Snitz Forums 2000