| Author |
 Topic  |
|
TNE
USA
391 Posts |
 Posted - 04/18/2012 : 11:40:26
|
|
The release notes for SHOPAK 5.01.02 say that debit transactions at Gilbarco DCRs with EPPs can work weithout GSM as long as the Ruby Card feature is present. What feature would this be?
|
|
|
gdtaylor
USA
1828 Posts |
Posted - 04/18/2012 : 14:24:25
|
| BRAVO |
Greg Taylor
Product Support Engineer
Verifone, Inc.
|
 |
|
|
helpless_tech
183 Posts |
Posted - 04/18/2012 : 19:27:31
|
| I've been waiting to try this one myself, but haven't had the chance yet. |
|
|
|
TNE
USA
391 Posts |
Posted - 04/19/2012 : 07:17:11
|
| So Greg, if we have the Bravo card we can just gemstall 'No GSM' and remove it? |
|
|
|
TNE
USA
391 Posts |
Posted - 06/01/2012 : 08:45:02
|
| Forgot to update earlier, but removing GSM through gemstall is all that is needed. @ sites completed with GSM removed. |
|
|
|
Peggy
USA
140 Posts |
Posted - 06/01/2012 : 09:25:52
|
| We tried this and it didn't work! Any other pointers? |
|
|
|
helpless_tech
183 Posts |
Posted - 06/02/2012 : 23:02:08
|
So far the only ones I've done have been fresh installs, but it's worked every time. Just Gemstall "NO GSM" as others have said and make sure you actually have a Bravo card installed in the Sapphire.
...But perhaps there is an issue converting existing installations that previously had a GSM. Maybe it needs a complete reload? Don't know, but there really isn't anything else to it. |
|
|
|
kmiller
USA
425 Posts |
Posted - 06/03/2012 : 08:36:19
|
| I've done one site and it was an existing site. Just Gemstalled NO GSM. It was Buypak. Of course the site must have EPP installed and loaded for TDES. |
|
|
|
Glenn Farmer
USA
308 Posts |
Posted - 06/03/2012 : 16:15:54
|
| So it works with no GSM at all? How are they doing that? Smart Fuel Controller? |
|
|
|
gdtaylor
USA
1828 Posts |
Posted - 06/04/2012 : 11:23:12
|
SFC is not required
since the EPP's hold the encryption, the GSM or AGSM is no longer required.
|
Greg Taylor
Product Support Engineer
Verifone, Inc.
|
|
|
|
sklwater
USA
397 Posts |
Posted - 06/21/2012 : 21:52:35
|
| I had a 5.01.04 upgrade today and no spare ports on the gempro, to add the systech unit. Called vhd and asked if I could remove the gsm and open the port, as was mentioned in this thread, and they told me no? Is there a good chance I could have just gemstalled No GSM and opened up a port? Gilbarco pumps and SFC. |
|
|
|
TNE
USA
391 Posts |
Posted - 06/22/2012 : 10:24:36
|
You do have to have the Bravo (Fast Food in registration) vard for some reason. I've switched our back office ports to the workstations to free up a port as well.
|
|
|
|
JGuth39950
USA
28 Posts |
Posted - 06/22/2012 : 17:43:03
|
| I thought that the base had to be base 166 to get this to work with out the gsm the shopak 5.01.04 is base 164 |
James |
|
|
|
skonley
132 Posts |
Posted - 06/22/2012 : 20:22:46
|
| This absolutely works with SHOPAK 5.01.04 - I've done it recently with 300's w/EPP - just don't Gemstall a GSM and program DCR parameters as normal. If you watch the end of the Graphic load it won't say DES 1 (et al.) it says something like UKPT INIT or something like that. |
|
|
|
sklwater
USA
397 Posts |
Posted - 06/25/2012 : 20:05:24
|
| Thanks! That is surely the easiest way to free up a gempro post for these loyalty installs! Will try tomorow. I put 506 cards in all my sites. |
|
|
|
sklwater
USA
397 Posts |
Posted - 06/28/2012 : 21:54:33
|
| Ok, confirmed shopak 5.01.04, running base 164, gemstalled no gsm, used port for fuel rewards. Debit working fine at dcr's! Life is good! |
|
|
|
Topic |
|
All Forums
Sapphire/Gilbarco w/ no GSM
New Topic
Printer Friendly
Register Now! 
