Petroleum Equipment Forum
Petroleum Equipment Forum
Home | Profile | Register | Active Topics | Active Polls | Users | Search | Help
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 General Business, Service & Construction
 Service & Technical
 Dresser Wayne Vista 3 error codes
Bookmark and Share
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

Jakes Gas

14 Posts

Posted - 07/20/2009 :  08:55:07  Show Profile
On the Keypad display you get Please pay inside (E01) and a DCPT poll error on the cash register for one pump. ON another pump on the dollar display when it goes to clear you get 709-2 22-05.1 code and it does not clear. What does this mean and how do I fix them? Can Anyone also send me a link to a manual for these pumps or know where I can get one?

xardoz

USA
4274 Posts

Posted - 07/20/2009 :  10:32:11  Show Profile  Visit xardoz's Homepage
E01 means the CAT (DCR,CRIND) is not communicating with the POS (Ruby, Nucleus, etc)

If you are getting an error code in the format 709-2 22-05.1, then you have a Vista, 1/Vista or 2/Vista
Not a 3/Vista.
It means you probably have a bad pulser

https://online.hillsdale.edu

Any society that would give up a little liberty to gain a little security
will deserve neither and lose both.
Benjamin Franklin
Go to Top of Page

Wisconsin Tech

114 Posts

Posted - 07/20/2009 :  21:58:04  Show Profile
Error code 5.1 could also be a Wayne Vac problem if pumps have vapor recovery.
Go to Top of Page

RodzRob

USA
158 Posts

Posted - 07/20/2009 :  23:09:00  Show Profile
I thought it was 5.2

PumpTronics Equipment
Miami,Fl.
Go to Top of Page

xardoz

USA
4274 Posts

Posted - 07/21/2009 :  19:31:43  Show Profile  Visit xardoz's Homepage
Could be 5.1 5.2 or 5.3 depending on the age of the Firmware.

https://online.hillsdale.edu

Any society that would give up a little liberty to gain a little security
will deserve neither and lose both.
Benjamin Franklin
Go to Top of Page

khanrius

USA
2 Posts

Posted - 06/03/2010 :  17:04:51  Show Profile
i hve this erron on my pump screen, Plz pay inside, Error 01"

now someone is saying in the forum that there must be something wrong with pulser..
can anyone tell me what part i hve to replace to get rid off this error

TK
Go to Top of Page

shanemeco

USA
624 Posts

Posted - 06/03/2010 :  18:52:07  Show Profile
Like Zardoz has already stated the E01 error code means that the DCPT (card reader) is not communicating with the POS. It has nothing to do with the error code on the other dispenser. It's possible that it's just lost it's address, but it could be another problem.
Go to Top of Page

khanrius

USA
2 Posts

Posted - 06/04/2010 :  09:11:07  Show Profile
quote:
Originally posted by shanemeco

Like Zardoz has already stated the E01 error code means that the DCPT (card reader) is not communicating with the POS. It has nothing to do with the error code on the other dispenser. It's possible that it's just lost it's address, but it could be another problem.


TK
Go to Top of Page
  Previous Topic Topic Next Topic  
Bookmark and Share
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Petroleum Equipment Forum © 2014 Petroleum Equipment Institute Go To Top Of Page
Register Now! XML Feed Follow us on Facebook RSS Feed Snitz Forums 2000