Petroleum Equipment Forum
Petroleum Equipment Forum
Home | Profile | Register | Active Topics | Active Polls | Users | Search | Help
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 General Business, Service & Construction
 Help Wanted
 Headhunter
Bookmark and Share
 New Topic  Topic Locked
 Printer Friendly
Author Previous Topic Topic Next Topic  

podczaski

594 Posts

Posted - 08/25/2004 :  21:14:03  Show Profile
Can anybody help with the name of a good headhunter that has had success with placement in our industry?

Appreciate any leads.

sklwater

USA
562 Posts

Posted - 08/30/2004 :  16:33:10  Show Profile
Never had a need for a headhunter in this business. Let the web do your placement. You can locate the companies in the area you desire, make contact thru e-mail or phone numbers found in PEI or their personal web pages. If you have knowledge, experience and references, why waste the money?
Go to Top of Page

podczaski

594 Posts

Posted - 09/01/2004 :  08:45:49  Show Profile
I am not looking for a job, but rather am looking for qualified employees. Everyone is well aware of how difficult it is to find, and hold on to employees. Training is a long process, and right now I need to bite the bullet and take another route.
Go to Top of Page

Rogers Musungu

USA
26 Posts

Posted - 09/07/2004 :  12:25:11  Show Profile
What do you have to say to this CV if you are looking for a headhunter?Posted - 05/24/2004 : 06:32:58
--------------------------------------------------------------------------------




1. EXPERIENCE : 2003 1992 KAMPALA-UGANDA/KIGALI-RWANDA

PETROLEUM EQUIPMENT CONTRACTOR

RETAIL OUTLETS :

- Construction of Petrol Station for Caltex, Shell, Total in Uganda & Rwanda ;
- Installation of underground pipes Galvanized and Universal Petrol Pipe (UPP);
- Installation of dispensing pumps like Gilbarco, Tokheim, Wayne, Satam;
- Commissioning of installed dispensing pumps;
- Complete over haul of dispensing pumps open, replace parts, and put Back into service;
- Fault finding and solution to retail out let pumps breakdowns;
- Programming of pump maintenance (planned and breakdown);
- Mobilization of personnel to undertake the repairs;
- Cost effectiveness of pump maintenance;
- Calibration of under ground tanks and the dispensing pumps;
- Pressure testing of underground pipe works for dispensers.

BULK FUEL DEPOTS

- Installation of buck meters like Wayne Smith, Satam, LC, Avery Hardoll;
- Calibration of all delivery meters;
- Maintenance of bulk pumps in the depots;
- Pipeworks in the depots, welding and storage tanks;
- Calibration of bulk storage tanks;
- Management of storage tank losses.

AVIATION DEPOTS

- Calibration of jet A1 and AVGAS delivery meters for Jomo Kenyatta Airport Nairobi, Entebbe in Uganda, Kigali in Rwanda, Wilson Airport Nairobi and Lokichogio in North Kenya.

- Repairs of fueling equipment like hydrants, shut off valves, non drip nozzles, etc.

LPG (LIQUIFIED PETROLEUM GAS)

- Installation of LPG pipework and cooking equipment in Colleges eg. Makerere University, Islamic University in Mbale, Mulago Hospital, etc.

- Maintenance and repairs of LPG equipment on behalf of Shell (U) Ltd and Caltex (U) Ltd in Uganda and Rwanda.


2. EXPERIENCE 1992 1986 NAIROBI KENYA

PETROLEUM EQUIPMENT CONTRACTOR

- Pump maintenance contractor for ESSO Kenya Ltd;

- Planed, Routine and Breakdown maintenance for pumps for ESSO;

- Follow up on Pump breakdowns and repairs for all the stations for ESSO in Kenya;

- Repairs of Compressors in the petrol stations for ESSO Kenya;

- Repairs of grease pumps and oil pumps in all ESSO Petrol Stations and consumer out lets;

- Installation of Underground pipes and tanks for ESSO Kenya, Caltex and Shell;

- Routine Maintenance of Pumps for Caltex out lets in Nairobi area.

3. EXPERIENCE 1989 1982 NAIROBI KENYA

PUMP MAINTENANCE ENGINEER ESSO KENYA Ltd

- In charge of central workshop for maintenance of all engineering equipment for ESSO Kenya for retail out lets, consumer out lets, depots and delivery trucks.

4. EXPERIENCE 1982 1978 MOMBASA KENYA

MAINTENANCE ENGINEER TRAINEE IN EAST AFRICAN OIL REFINERIES MOMBASA.

- Trainee maintenance engineer mechanical;

- Trainee instrumentation technician;

- Measurement, and process control technician;

- Maintenance of furnaces, boilers, separators for fuel distilleries;

- Monitoring of temperatures at various stages of distillation in the refinery;

- Storage tanks gauging systems.

5. EDUCATION YEAR 2001 GREESBORO NC.USA

- Participation into the in-depth construction of Gilbarco pumps in the factory in Greesboro North Carolina USA.
YEAR 2002 IPSWICH TOWN UK

- Participation into primary installation of Universal Petrol Pipe (UPP)underground pipe work for consumer and retail out lets.

YEAR 1979 1982 - KENYA POLYTECHNIC NAIROBI KENYA;

- Higher National Diploma (HND) in Mechanical Engineering.

YEAR 1976 1979 MOMBASA POLYTECHNIC MOMBASA - KENYA

- Ordinary National Diploma (OND) in Mechanical and Electrical Engineering.

6. SALARY EXPECTATIONS:

- USD 30.00 per hour but negotiable (Thirty Dollars per Hour);
- Housing and car;
- Medical care;
- Holiday.

INTERESTS

- To resettle anywhere in the USA and give you ten good years of my carreer in the oil industry.

OTHERS

Reading, travelling, soccer & tennis.




Resume Built By


ENG. MUSUNGU Rogers



Rogers Musungu
Novice


Uganda
17 Posts
Posted - 07/11/2004 : 10:12:42

Go to Top of Page

Rogers Musungu

USA
26 Posts

Posted - 10/23/2004 :  07:20:00  Show Profile
What happened to your requirement of a head hunter??????
Go to Top of Page
  Previous Topic Topic Next Topic  
Bookmark and Share
 New Topic  Topic Locked
 Printer Friendly
Jump To:
Petroleum Equipment Forum © 2014 Petroleum Equipment Institute Go To Top Of Page
Register Now! XML Feed Follow us on Facebook RSS Feed Snitz Forums 2000